|
Our shop is located right off I-95 in Baltimore
Maryland. Below are the specifications that we can
anodize in our facility. We have been in the metal finishing business for over
25 years. We offer tight quality control on our
anodizing and iridite aluminum chromate process as well
as quick turn around times for your parts.
ANODIZED, MIL-A-8625
ANODIZED, MIL-A-8625, TYPE 2 -
Decorative Anodizing
ANODIZED, MIL-A-8625, TYPE 2, CLASS
1 - Decorative Anodizing Clear
ANODIZED, MIL-A-8625, TYPE 2, CLASS
2 - Decorative Anodizing dyed a certain color
ANODIZED, MIL-A-8625, TYPE 3 - Hard
Coat
ANODIZED, MIL-A-8625, TYPE 3, CLASS
1 - Hard Coat Clear
ANODIZED, MIL-A-8625, TYPE 3, CLASS
1 - Hard Coat dyed a certain color, usually black or
green
AN0058 ANODIZED, MIL-STD-171,
FINISH 7.2.
MIL-STD-171, 7.2.1 calls out
Anodic film on aluminum, Decorative Anodizing,
MIL-A-8625*, Type II Class 1, not dyed
MIL-STD-171, 7.2.2 calls out
Anodic film on aluminum, Decorative Anodizing,
MIL-A-8625,* Type II Class 2, dyed, color to be
specified
MIL-STD-171, 7.3.1 calls out
Chemical film, Aluma-IR, MIL-C-5541 Class 1A, for
maximum protection against corrosion, painted or
unpainted. This process produces a iridescent greenish
clear finish on the aluminum part
MIL-STD-171, 7.3.3 calls out
Chemical film, Aluma Gold, MIL-C-5541 Class 3, for
protection against corrosion where low electrical
resistance is required. This process produces a gold
colored finish on the aluminum part
MIL-STD-171, 7.5.1 calls out
Hard anodic coating on aluminum, MIL-A-8625*, Hard Coat
Anodizing, Class 1 - thickness 0.002” ± 0.0002” unless
otherwise specified, not dyed
MIL-STD-171, 7.5.2 calls out
Hard anodic coating on aluminum, MIL-A-8625*, Hard Coat
Anodizing, Class 2 - thickness 0.002” ± 0.0002” unless
otherwise specified, dyed, color to be specified
PHONE: 410-633-0030
EMAIL:
sales@anodizingservice.com
|
